Site Overlay


Please move the CMOS jumper from its default position to for a few seconds, and then back. This item determines when the system will prompt for password – every time the system boots or only when it enters the BIOS setup. Features Abit designed a well laid out board with all major connections easily reached except for the floppy drive connector. We do miss the power on and reset buttons from previous Abit boards. This item configures the number of cylinders.

Uploader: Yolkree
Date Added: 3 July 2017
File Size: 50.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 4331
Price: Free* [*Free Regsitration Required]

Write down the sound card model, motherboard model, BIOS identification number on the technical support file refer to main instructionsand describe the problem in the space provided. Hardware Setup Hardware Setup Chapter 2.

Today I see only two e-tailers with a few of ethwrnet Asus A8R32 and of course they are price gouging like usual.

ABIT AT8 32X – motherboard – ATX – Socket – X CrossFire Overview – CNET

We did not have any issues utilizing these slots with video cards containing single slot cooling systems. This option enables or disables the on-chip SATA controller. The Sapphire version is a virtual copy of the ATI Manta Reference design and is expected to mirror the performance and overclocking capabilities of the Reference board. Enter text from picture: Page 2 No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual.


The yellow clear CMOS jumper block is a traditional jumper design located to the left of the IEEE connector and along the edge of the motherboard. Technical Support Form Company Name: When this item is set to Enabled, if the BIOS detects no floppy drive, it will display a floppy disk drive error message.

Pci Express X1 Slots Chapter 2 Back Panel Connectors Line-Out: Please contact the reseller from whom you bought the product. You should be able to get RMA service there. Motherboard model number REV: Log in Don’t have an account?

Abit AT8: µGuru comes to the RD480

Hardware Setup 7. Page of 80 Go. Refer to the following table for the relationship among different configurations over the SATA connectors. Connects to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc.

Set CMOS century to 20h or 19h 4.

Suspicious Activity Detected

The BIOS setup screens and descriptions illustrated in this manual are for your reference only and may not completely match what you see on your screen. The numeric keypad functions as number keys. To the right of the audio panel are two USB 2. Because of tremendous number of email messages we receive every day, we are forced to give greater weight to certain types of messages than to others.


Hardware Setup 9. The system may be unstable or unable to boot up if your DRAM module does not support the clock you set. Due to the low rise heat sink covering the ATI Crossfire Xpress chipset, the installation of larger air or water-cooling solutions should not be an issue. To enable CrossFire Mode, you will need to: Hardware Setup 4.

Please update this review and maybe have a follow up on all the Crossfire boards you have reviewed. Install Audio Driver The installation procedures and screen shots in this section are based on Windows XP operating system.

Hardware Setup Before the Installation: Basic Features Abit AT8: